Welcome To custom design gift for father!

accent pillow case baby decorative DIY Mini Holiday Tree Skirt decorative pillow shams

custom design gift for father
custom design gift for father
accent pillow case baby decora
pillow shams floral
accent pillow case baby decorative DIY Mini Holiday Tree Skirt decorative pillow shams
Views: 164 Updated: :2020-03-05

You don’t have to have a giant tree in your home to celebrate the holidays in style. This mini-sized skirt fits tabletop trees and is a great way to dress up your home with just a little fabric.

Finished size = 14″; diameter

accent pillow case baby burlap

Supplies

* If working with 1/2 yard of fabric, additional lining fabric does not need to be purchased unless desired; the same material can be used to create the underside of the tree skirt. Materials such as brocade have just as beautiful designs on the “wrong side” of the material as the exterior so the reverse print can easily be used as well.

Step 1) Prepare the fabric.

Download and print the Mini Tree Skirt template. Mini_Tree_Skirt_Pattern.pdf

Fold the fabric in half lengthwise and then fold it in half crosswise. Your fabric should now be folded in fourths or quarters.

Place the tree skirt template on the fabric along the fold lines as indicated.

Cut along the CURVED EDGE ONLY.

Open up the folded tree skirt. You should now have a donut-shaped piece of material. Cut a slit from the outer edge to the hole in the middle, perpendicular to the outer edge.

Repeat the above steps to cut out the lining fabric.

Step 2) Sew the seams.

All seams allowances are 1/4″-wide unless otherwise specified.

Place the two fabric pieces right sides together and sew around the entire edge, pivoting at the corners. Leave a 3″-long opening for turning in the middle of one straight edge.

Clip the cornersaccent pillow case baby decorative, notch the curves, and turn the tree skirt right side out through the opening.

Topstitch if desired or slipstitch the opening closed by hand.

Step 3) Add the hook-and-loop tape closure.

The hook-and-loop tape closure is designed to be hidden and allows the tree skirt edges to come together without overlapping.

Attach the piping foot to your machine. Select a straight stitch and move the needle (or the guide on the foot) to one side so the needle sews a scant 1/8″ from the edge.

With the right side of the tree skirt facing up, place the “scratchy” (hooks) side of a piece of hook-and-loop tape under the tree skirt at the top of one straight edge. Position it so that 1/2″ pokes out from under the finished edge.

Sew it in place with a long rectangle. Repeat for the second “scratchy” piece, placing it at the inner edge of the tree skirt.

On the opposite short edge of the tree skirt, place the wrong side of the “soft” (loops) side of the hook-and-loop tape under one corner of the tree skirt on the right side of the lining, matching the raw edges. This piece should NOT hang over the finished edge. Repeat for the second “soft” piece, placing it at the other corner of the short edge.

To join the two edges, place the “soft” pieces over their “scratchy” counterparts and press into place.

Done!

Variations

I made a key-ring tag this time!! So as it is easy, please challenge!!

Hello everyone,

After a long, hard winter, gardening season is finally upon us. Naturally, we want to have the prettiest lawn and the most productive flower and vegetable gardens possible. And many of us rely on chemicals to achieve that. But did you know that the chemicals we use on our lawns and gardens are infiltrating our lungs, the food we eat and water we drink, and are even being absorbed through our skin?